Tile & Grout Cleaning

tile-and-grout-cleaningTile & Grout Cleaning


The majority of people today with tile floors eventually run into the same problem. Floors with dark dirty grout lines in the kitchen and walk areas, and light clean looking grout where traffic is not frequent. The reason this happens is fairly simple. The dirt that shoes leave on your tile transferred to the grout through used to clean the tile- namely mopping. The more you mop, the worse the grout will look. Unfortunately, this not only makes your grout look dirty, but the liquid also penetrates the grout (grout is porous) and permanently stains it. Even the cleaners used with the water can stain grout. This is why that "back to new" look is usually not obtainable through cleaning alone, whether it's you cleaning it or a professional service.

Cleaning Solutions professionally cleans all types of ceramic tile and grout. Including floors, counter tops, showers and bathroom surfaces. Cleaning Solutions uses a pressure washing system designed specifically for tile and grout. Our truck mounted cleaning unit power washes the floor to extract soil and grease from the pores of the tile and grout or other hard surface floors. The system generates water pressure of 800 to 1,200 P.S.I. with the water temperature approximately 230 degrees to soften and extract years of soil and contaminants. The floor tool connects to a vacuum hose, which sucks the cleaning disk to the floor, and confines the water spray inside the 16 inch disk. There is virtually no splash ever to worry about. The vacuum hose draws away the water, along with the dirt, to a containment tank on our truck, and we dispose of the wastes in accordance with EPA regulations. tile-tool-2You will find that our process restores the tile and grout to 85 to 90 percent of its original appearance. Some stains, (red wine, mustard, dyes, etc.) will not come out because they dye the grout, but the combination of heat, water pressure and suction removes most stains. For all your Tile and Grout cleaning needs in Roseville, CA.

Our Process:

1. Inspection of tile surfaces, examining for the best possible cleaning method. We are not responsible for damaged grout.

2. We apply a pre-treatment mild cleaning solution, then hand scrub the grout with a special designed hand tool to loosen embedded soils, dirt and grime. Allowing it to soak for approximately 15 minutes.

3. We then use Hydro-Force tools with hot steam high pressure rotating head cleaner then extract all of the soil and dirty water to our truck with our high powered vacuum.

4. Thoroughly dry all surfaces.

5. Optional- Apply a grout sealer to protect from re-soiling and mildew. (additional charge for sealing grout, because it is very labor intensive.)


Optional Sealing

After Cleaning Solutions cleans your tile and grout, we can seal the grout with our impregnating sealer. The grout absorbs the sealer into its pores, creating a barrier against future staining. The sealer does not change the appearance of the grout by adding a shine or luster. Instead, it preserves the natural beauty of the surface. For all your Tile and Grout Cleaning needs in Roseville, CA 916-765-3637


When it's time for your tile and grout to be professionally cleaned, call Cleaning Solutions. For all your tile and grout cleaning needs in Roseville, CA 916-765-3637